Connect An Esata Device To The Router; Usb Device Requirements - NETGEAR R7500 User Manual

Connect an eSATA Device to the Router

You can connect an eSATA device to the eSATA port located on the right side of the router.
Figure 9. eSATA port

USB Device Requirements

The router works with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB devices that the router supports, visit
http://kbserver.netgear.com/readyshare.
Some USB external hard drives and flash drives require you to load the drivers onto the
computer before the computer can access the USB device. Such USB devices do not work
with the router.
The router supports the following file system types for full read/write access:
• FAT16
• FAT32
• NTFS
• NTFS with compression format enabled
• Ext2
• Ext3
• Ext4
• HFS
• HFS+
Nighthawk X4 AC2350 Smart WiFi Router
Share Storage Devices Attached to the Router
63