Rear Panel; Turn The Leds On Or Off - NETGEAR R7500 User Manual

Rear Panel

The rear panel connections and buttons are shown in the following figure.
LED On/Off
switch
Figure 3. Router rear panel
Pressing the Reset button restores the factory settings. See

Turn the LEDs On or Off


To turn the LEDs on or off:
Slide the LED On/Off switch on the rear panel to the On or Off position.
LED On/Off
switch
The Power LED stays lit even if the LED On/Off switch is in the Off position.
Nighthawk X4 AC2350 Smart WiFi Router
Gigabit Ethernet Internet
Reset
button LAN ports 1–4
Hardware Setup
11
Power Power
port connector On/Off
Factory Settings on page 168.