Check The Internet Connection Status - NETGEAR R7500 User Manual

The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. The BASIC Home screen displays
5. Click the ADVANCED tab.
The ADVANCED Home screen displays.
6. In the Internet Port pane, click the Show Statistics button.
The following information displays:
• System Up Time. The time elapsed since the router was last restarted.
• Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port,
the screen displays the following information:
- Status. The link status of the port.
- TxPkts. The number of packets transmitted on this port since reset or manual
clear.
- RxPkts. The number of packets received on this port since reset or manual clear.
- Collisions. The number of collisions on this port since reset or manual clear.
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN and
LAN ports.
- Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN
ports.
- Up Time. The time elapsed since this port acquired the link.
- Poll Interval. The interval at which the statistics are updated in this screen.
7. To change the polling frequency, enter a time in seconds in the Poll Interval field and click
the Set Interval button.
To stop the polling entirely, click the Stop button.

Check the Internet Connection Status


To check the Internet connection status:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
Nighthawk X4 AC2350 Smart WiFi Router
Manage Your Network
103