Change The Router's Device Name; Change The Lan Tcp/Ip Settings - NETGEAR R7500 User Manual

4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
5. Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your change takes effect.

Change the Router's Device Name

The router's device name is R7500. This device name displays in the file manager when you
browse your network.

To change the router's device name:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. In the Device Name field, type a new name.
6. Click the Apply button.
Your change is saved.

Change the LAN TCP/IP Settings

The router is preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The router's default LAN IP configuration is as follows:
• LAN IP address. 192.168.1.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings.
Nighthawk X4 AC2350 Smart WiFi Router
Network Settings
118