Log In To The Router; Change The Language - NETGEAR R7500 User Manual

• Make sure that the computer is connected to one of the four LAN Ethernet ports or
wirelessly to the router.
• Make sure that the router is receiving power and that its Power LED is lit white.
• Close and reopen the browser or clear the browser cache.
• Browse to http://www.routerlogin.net.
• If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed
everything correctly.
b. Contact your ISP to verify that you have the correct configuration information.
c. Read Chapter 14,
product and contact NETGEAR technical support.

Log In to the Router

When you first set up your router, NETGEAR genie automatically starts when you launch a
web browser on a computer that is connected to the router. If you want to view or change
settings for the router, you can use genie again.

To log in to the router:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.

Change the Language

By default, the language is set to Auto.

To change the language:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
Nighthawk X4 AC2350 Smart WiFi Router
Troubleshooting. If problems persist, register your NETGEAR
Connect to the Network and Access the Router
20