Attach The Antennas; Usb Ports On The Left Panel - NETGEAR R7500 User Manual

Attach the Antennas


To attach the antennas:
1. To determine where to attach the antennas, match the labels on the antennas with the
labels on the router.
2. Align the antennas with the antenna posts on the router.
3. Attach the antennas on the threaded antenna posts.
4. Position the antennas for the best WiFi performance.
NETGEAR recommends that you position all of the antennas vertically, as shown.

USB Ports on the Left Panel

Two 3.0 USB ports are located on the left panel.
Figure 4. USB ports
Nighthawk X4 AC2350 Smart WiFi Router
Hardware Setup
12