l\-
Alternator Replacement
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buttons,
2. Disconnect the negative cable from the battery first,
then disconnect the positive cable.
3. Remove the front bumper (see page 20-85).
4. Remove the right side headlight (see page 22-79).
5. Remove the reserve tank from the bracket.
6. Remove the drive belt (see page 4-26).
7. Remove the three bolts securing the alternator.
8 x 1 . 2 5 m m
22 N.n 12.2 kgl.m,
Disconnect the alternator connector (A) and BLK
wire (B) from the alternator.
8 N . m
10.8 kgf.m,6lbf.ft)
\
6
' I
1 .
9 .
1 0 .
1 3 .
1 4 .
Remove the alternator.
Installthe alternator and drive belt in the reverse
order of removal.
Connect the positive cable and negative cable to
the battery.
Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
Set the clock.
Perform the engine control module {ECM) idle learn
p r o c e d u r e ( s e e p a g e 1 1 - 1 3 9 ) .
t t .
4-29