Cargo Area Light Test/Replacement; Hatch Latch Switch Test - Honda EP3 Service Manual

Cargo Area Light Test/Replacement
1 . Open the hatch.
Carefully pry out the cargo area light (A).
Cargo Area Light: 5W
Disconnect the 2P connector (B) from the light.
Check for continuity between the No. 1 (+) and
N o . 2 ( ) t e r m i n a l s . T h e r e s h o u l d b e c o n t i n u i t y .
lf there is no continuitv, check the bulb. lf the bulb
is OK, replace the cargo area light.
' 1 .
Hatch Latch Switch Test
Open the hatch.
Remove the hatch lower trim panel (see page 20-
s3).
Disconnect the 2P connector {A) from the hatch
4 . Check for continuity between the No. 1 and No. 2
t e r m i n a l s .
. There should be continuity with the hatch open
. There should be no continuity with the hatch
c t o s e o .
lf the continuity is not as specified, replace the
hatch latch.
l a t c h ( B ) ,
22-97