License Plate Light Replacement; Side Marker Light Replacement - Honda EP3 Service Manual

License Plate Light Replacement
1 . Remove the hatch lower trim panel (see page 20-
P u l l t h e l i c e n s e p l a l e l i g h t a s s e m b l y o u t . a n d
disconnect the 2P connector (A) from the light.
License Plate Light: 5Wx2
3 .
4 .
'[-J^
,^f , t lo \
+tiP'-
t \-J
' f l ^
"/
\==-^
S e p a r a t e t h e l e n s ( B ) a n d h o u s i n g ( C ) , t h e n r e m o v e
t h e b u l b .
l n s t a l l t h e l i g h t i n t h e r e v e r s e o r d e r o f r e m o v a l .
Side Marker Light Replacement
1. Carefully pry the light (A) outofthe rear bumper,
and disconnect the 2P connector (B) from the light.
Be careful not to damage the rear bumper.
Side Marker Light:
5 W
2 . Remove the bulb socket (A) by turning it 45'
counterclockwise. then reolace the bulb.
22-83