Draytek Vigor2830 Series User Manual page 96

After finishing all the settings here, please click OK to save the configuration.
D e t a i l s
D e t a i l s
Available settings are explained as follows:
Item
Network Configuration
DHCP Server
Configuration
Vigor2830 Series User's Guide
Gateway IP Address - Enter a value of the gateway IP
address for the DHCP server. The value is usually as same
as the 1st IP address of the router, which means the router is
the default gateway.
P a g e f o r I P R o u t e d
P a g e f o r I P R o u t e d
Description
Enable/Disable - Click Enable to enable such
configuration. Click Disable to disable such configuration.
For Routing Usage - Click this radio button to invoke this
function.
IP Address - Type in private IP address for connecting to a
local private network (Default: 192.168.1.1).
Subnet Mask - Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24).
RIP Protocol Control –
Disable - Deactivate the RIP protocol. It will lead to a
stoppage of the exchange of routing information between
routers. (Default)
Enable – Activate the RIP protocol.
DHCP stands for Dynamic Host Configuration Protocol.
The router by factory default acts a DHCP server for your
network so it automatically dispatch related IP settings to
any local user configured as a DHCP client. It is highly
recommended that you leave the router enabled as a DHCP
S u b n e t
S u b n e t
86