Draytek Vigor2830 Series User Manual page 29

PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
1. Choose WAN1 as WAN Interface and click the Next button; you will get the following
page.
Available settings are explained as follows:
Item
VPI
VCI
Protocol /
Encapsulation
Fixed IP
IP Address
Primary DNS
Secondary DNS
Description
Type in the value provided by ISP.
Auto detect – Click this button to have the VPI and VCI to
be detected by the system automatically
Type in the value provided by ISP.
There are several modes offered for you to choose for
WAN1 interface.
Choose PPPoE or PPPoA as the protocol.
Click Yes to enable Fixed IP feature.
Type the IP address if Fixed IP is enabled.
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
19
Vigor2830 Series User's Guide