Draytek Vigor2830 Series User Manual page 262

Codec
Ring Port
Status
STUN Server
External IP
SIP PING interval
Click any index link to access into the following page for configuring SIP account.
Available settings are explained as follows:
Vigor2830 Series User's Guide
Display the codec type for the account.
Specify which port will ring when receiving a phone call.
Set Phone, ISDN1-S0 or ISDN-TE as the default ring port
for the SIP account. If you choose Phone or ISDN1-S0, the
ISDN2-TE selection will be dimmed, vice versa. There are
ten internal lines with numbers (30 – 39) offered for
ISDN-S0. You can specify any one of them as ring port for
specified SIP account. By the way, ISDN-S0 can be used by
mapping with MSN numbers.
Show the status for the corresponding SIP account. R
means such account is registered on SIP server
successfully. – means the account is failed to register on
SIP server.
Type in the IP address or domain of the STUN server.
Type in the gateway IP address.
The default value is 150 (sec). It is useful for a Nortel
server NAT Traversal Support.
252