Security - Draytek Vigor2830 Series User Manual

Rate Control
3 . 1 3 . 3 S e c u r i t y
3 . 1 3 . 3 S e c u r i t y
This page allows you to set security with different modes for SSID 1, 2, 3 and 4 respectively.
After configuring the correct settings, please click OK to save and invoke it.
The default security mode is Mixed (WPA+WPA2)/PSK. Default Pre-Shared Key (PSK) is
provided and stated on the label pasted on the bottom of the router. For the wireless client who
wants to access into Internet through such router, please input the default PSK value for
connection.
By clicking the Security Settings, a new web page will appear so that you could configure the
settings of WPA and WEP.
It controls the data transmission rate through wireless
connection.
Upload – Check Enable and type the transmitting rate for
data upload. Default value is 30,000 kbps.
Download – Type the transmitting rate for data download.
Default value is 30,000 kbps.
267
Vigor2830 Series User's Guide