Draytek Vigor2830 Series User Manual page 92

DNS Server
Configuration
Vigor2830 Series User's Guide
other than the Vigor Router's, you can let Relay Agent help
you to redirect the DHCP request to the specified location.
Enable Server - Let the router assign IP address to every
host in the LAN.
Disable Server – Let you manually assign IP address to
every host in the LAN.
Enable Relay Agent –Specify which subnet that DHCP
server is located the relay agent should redirect the DHCP
request to.
Start IP Address - Enter a value of the IP address pool for
the DHCP server to start with when issuing IP addresses. If
the 1st IP address of your router is 192.168.1.1, the starting
IP address must be 192.168.1.2 or greater, but smaller than
192.168.1.254.
IP Pool Counts - Enter the maximum number of PCs that
you want the DHCP server to assign IP addresses to. The
default is 50 and the maximum is 253.
Gateway IP Address - Enter a value of the gateway IP
address for the DHCP server. The value is usually as same
as the 1st IP address of the router, which means the router is
the default gateway.
Lease Time – Enter the time to determine how long the IP
address assigned by DHCP server can be used.
DNS stands for Domain Name System. Every Internet host
must have a unique IP address, also they may have a
human-friendly, easy to remember name such as
www.yahoo.com. The DNS server converts the
user-friendly name into its equivalent IP address.
Primary IP Address -You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the router will automatically apply default DNS
Server IP address: 194.109.6.66 to this field.
Secondary IP Address - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the router will automatically apply default secondary DNS
Server IP address: 194.98.0.1 to this field.
The default DNS Server IP address can be found via Online
Status:
If both the Primary IP and Secondary IP Address fields are
left empty, the router will use the DNS server assigned by
ISP. If not, the router will assign its own IP address to local
users as a DNS proxy server.
Force router to use address for DNS- Force Vigor router
82