Draytek Vigor2830 Series User Manual page 91

Force router to use "DNS
server IP address"
settings as specified in ...
Inter-LAN Routing
After finishing all the settings here, please click OK to save the configuration.
To configure LAN 1 ~ LAN 4, or IP Routed Subnet, simply click Details Page to open the
settings page.
D e t a i l s P a g e f o r L
D e t a i l s P a g e f o r L
LAN1 is the default configuration for basic host connection.
Available settings are explained as follows:
Item
IP Address
Subnet Mask
RIP Protocol Control
DHCP Server
Configuration
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4 instead of DNS servers given
by the Internet Access server (PPPoE, PPTP, L2TP or
DHCP server).
Check the box to link two or more different subnets (LAN
and LAN).
A N 1
A N 1
Description
Type in private IP address for connecting to a local private
network (Default: 192.168.1.1).
Type in an address code that determines the size of the
network. (Default: 255.255.255.0/ 24)
Disable - deactivate the RIP protocol. It will lead to a
stoppage of the exchange of routing information between
routers. (Default)
Enable – activate the RIP protocol.
DHCP stands for Dynamic Host Configuration Protocol.
The router by factory default acts a DHCP server for your
network so it automatically dispatch related IP settings to
any local user configured as a DHCP client. It is highly
recommended that you leave the router enabled as a DHCP
server if you do not have a DHCP server for your network.
If you want to use another DHCP server in the network
81
Vigor2830 Series User's Guide