Draytek Vigor2830 Series User Manual page 237

Available settings are explained as follows:
Item Description
Determine the dial-in connection with different types.
Allowed Dial-In
Type
PPTP - Allow the remote dial-in user to make a PPTP VPN
connection through the Internet. You should set the User Name
and Password of remote dial-in user below.
IPSec Tunnel- Allow the remote dial-in user to trigger an
IPSec VPN connection through Internet.
L2TP with IPSec Policy - Allow the remote dial-in user to
make a L2TP VPN connection through the Internet. You can
select to use L2TP alone or with IPSec. Select from below:
Specify Remote VPN Gateway - You can specify the IP
address of the remote dial-in user or peer ID (should be the
None - Do not apply the IPSec policy. Accordingly, the
VPN connection employed the L2TP without IPSec
policy can be viewed as one pure L2TP connection.
Nice to Have - Apply the IPSec policy first, if it is
applicable during negotiation. Otherwise, the dial-in VPN
connection becomes one pure L2TP connection.
Must - Specify the IPSec policy to be definitely applied
on the L2TP connection.
227
Vigor2830 Series User's Guide