Remote Dial-In User - Draytek Vigor2830 Series User Manual

3 . 1 0 . 7 R e m o t e D i
3 . 1 0 . 7 R e m o t e D i
You can manage remote access by maintaining a table of remote user profile, so that users can
be authenticated to dial-in via VPN connection. You may set parameters including specified
connection peer ID, connection type (VPN connection - including PPTP, IPSec Tunnel, and
L2TP by itself or over IPSec) and corresponding security methods, etc.
The router provides 32 access accounts for dial-in users. Besides, you can extend the user
accounts to the RADIUS server through the built-in RADIUS client function. The following
figure shows the summary table.
Available settings are explained as follows:
Item
Set to Factory Default
Index
User
Active
Status
a l - i n U s e r
a l - i n U s e r
Description
Click to clear all indexes.
Click the number below Index to access into the setting
page of Remote Dial-in User.
Display the username for the specific dial-in user of the
LAN-to-LAN profile. The symbol ??? represents that the
profile is empty.
Check the box to enable the selected profile.
Display the access state of the specific dial-in user. The
symbol V and X represent the specific dial-in user to be
active and inactive, respectively.
217
Vigor2830 Series User's Guide