Point-Of-Sale Hardware; Netpit And Pit Devices; Figure 5-8 Serial Ports For Pos; Figure 5-9 Cash Registers Connected To A Honeywell Pit - Honeywell Rapid Eye Installation Manual

Point-of-Sale Hardware

NetPIT and PIT Devices

Document 800-02607V3 Rev A
11/09
Connect a point-of-sale (POS) device or other data communication equipment to any of:
SERIAL PORTs 1 to 8 Use RJ45 connectors (see
Figure 5-8 Serial Ports For POS
To connect a Multi-Media DVR to a point-of-sale (POS) device—a cash register, automatic
teller machine (ATM), and so on—a device is needed for Protocol Interface Translation
(PIT) or Network Protocol Interface Translation (NetPIT). Rapid Eye Multi-Media DSP DVRs
support PITs and a NetPIT, for attaching many serial devices to a Multi-Media DVR.
A PIT can provide communications for one device (AVBPIT1) or up to four devices
(AVBPIT4POS). A NetPIT device provides communications for up to 16 POS devices from
one serial port.
Figure 5-9 Cash Registers Connected to a Honeywell PIT
PIT and NetPIT devices are connected to the serial ports on the back of Multi-Media DVRs.
Your installer configures the PIT/NetPIT device for use with the make and model of POS
device. NetPIT supports applications by Retalix® (RetPIT), Micros® (MicPIT) and AtmPIT.
Rapid Eye™ Multi-Media DVR Installation Guide
Figure 5-8).
PIT/NetPIT
Up to 16 POS devices
per serial port
Serial
Ports
63