Baratza Vario Operation Manual page 6

Important Information
Please read the information below
very carefully. It contains impor-
tant tips for the use, the safety and
the maintenance and care of this
appliance. Please keep these op-
erating instructions for future refer-
ence.
Your new VARIO
™
120 VAC or 230 VAC. Please con-
firm the voltage of your VARIO™
on the nameplate attached to the
bottom of the grinder.
VAC Vario can be used from 100 to
130 VAC and the 230 VAC VARIO
can be used from 200 to 240 VAC.
Please insure your supply voltage
range matches the nameplate volt-
age on you VARIO
Only clean the grinder housing with
a dry or slightly damp cloth.
Do not use this grinder for any-
thing other than its intended use
(i.e. grinding whole roasted coffee
beans). Maximum continuous duty
cycle is 25%. Longest continuous
grind time is 90 seconds.
Disassemble your grinder only as
directed in the care and cleaning
section of this manual. If you can-
not remedy a malfunction, please
is rated for either
The 120
™
.
™
visit the web at www.baratza.com
for assistance.
Repairs are to be performed only
by authorized service centers. An
improperly repaired grinder is a
source of risk to the user and voids
the warranty.
Baratza will not accept any liability
for damage or injury if the grinder
is used other than for its intended
purpose or is improperly operated
or repaired. All warranty claims will
be void.
For Your Safety
Do not operate the grinder with
a damaged cord or plug, or if the
grinder malfunctions.
Do not leave your grinder unat-
tended while turned ON.
Shut off and unplug the grinder
from the electrical outlet before
cleaning. To unplug, grasp plug
and removed from the outlet-never
pull on the cord.
Do not immerse the grinder, plug or
cord in water or any other liquid.
4