7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED
5. Press
display the message "Begin Download." The HEGS5000 is now waiting for data
from the PC.
6. From the START bar on your PC, Select Programs → Ultrak → Ultrak Code Server.
The following window appears.
7. The Port Properties Icon
on this Icon open the CommPort Properties window.
Select the serial port the download adapter is connected to and click OK.
Rev. 1.01
. The controller will clear the memory and, when ready to download, will
Figure 9: Ultrak Code Server Window
allows you to select which serial port to use. Clicking
Figure 10: CommPort Properties Window
50
900.0800
19-Jun-06