Multiplexer Control - Honeywell HEGS5000 User Manual

6.3

MULTIPLEXER CONTROL

The HEGS5001 controller sends basic commands to the multiplexer to simulate pressing
the buttons on the front panel of the multiplexer. Refer to the Multiplexer User Manual
for details on the operation of the multiplexer.
ICON
MUX
+/-
Joystick Knob
Joystick (Left, Right
Up, Down)
Full Screen
Picture-in-Picture
2 x 2 Display
3 x 3 Display
4 x 4 Display
Sequence
Freeze
Live Record
Rev. 1.01
KEY
Press once to send a single multiplexer command (LED
will flash). Press twice to lock the controller in multiplexer
mode. A steady LED indicates the controller is locked in
multiplexer mode. To exit the Multiplexer mode, press
the MUX (
When in multiplexer mode, press + or – to scroll through
the available options on the controller LCD. Press Enter
when the desired option is displayed.
Select – Select a multiplexer (001-016)
Review – VCR Review mode
Zoom – Access/Exit the multiplexer zoom menu
Set – Mimics the Set key on the multiplexer
2 nd
Menu – Access/Exit the multiplexer menu (not
available on all models)
In the multiplexer setup menu, the joystick zoom in
function mimics the SET button.
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the multiplexer cursor keys.
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the mouse X/Y movements.
The joystick ZOOM IN function mimics the Set key or the
Left Mouse Button.
Places the multiplexer into full screen mode.
Places the multiplexer in picture-in-picture (PIP) mode.
Press again to reverse the cameras in the PIP.
Places the multiplexer into 2 x 2 mode. Continue
pressing to view different 2x2 screens.
Places the multiplexer into 3 x 3 mode.
Places the multiplexer into 4 x 4 mode.
Places the multiplexer into sequence mode. Select
sequence 1 or 2 from the soft menus.
Places the multiplexer into freeze mode.
Used to record a select camera
46
DESCRIPTION
) key
– Mimics the 2 nd key on the multiplexer
900.0800
19-Jun-06