List Vectorscans; List Vectorscan Contents - Honeywell HEGS5000 User Manual

5.2.7 List VectorScans

To view a list of the programmed VectorScans:
1. Press the Dome Menu (
2. Press + or – until VectorScan Menu is displayed on the LCD and press Enter (
3. Press + or – until List is displayed on the LCD and press Enter (
The VectorScan list, including number and title, is displayed on the monitor (where
the video from the KD6/HD6 can be viewed).
The controller LCD display shows the command Page Down. Press Enter (
view more pages of the listing. When you have reached the end of the listing, End
of Directory is displayed on the monitor. To go back to the first page of the listing
press Enter (
4. When finished viewing the VectorScan listing, press the Clear/Manual (
5. To exit the menu on the LCD controller, press Dome Menu (
Menu Esc (

5.2.8 List VectorScan Contents

To view a list of the programmed VectorScans:
1. Press the Dome Menu (
2. Press + or – until VectorScan Menu is displayed on the LCD and press Enter (
3. Press + or – until Vscan Contents is displayed on the LCD and press Enter (
4. Enter the VectorScan number (0-9) you want to view.
The contents of the selected VectorScan is displayed on the monitor where the
KD6/HD6 video is viewed.
Use the
Rev. 1.01
1. ___
) key.
3. ___
).
1. ____
2. ____
) key.
3. ____
1. ___
) key.
3. ___
and keys to scroll up and down through the contents.
32
).
).
) to
) key.
1. ___
) or press the
3. ___
).
).
900.0800
19-Jun-06