Section 5: Standalone Mode Hegs5000; Operation; Figure 5. Hegs5000 English Text Overlay; Figure 6. Hegs5000 Icon Overlay - Honeywell HEGS5000 User Manual

5.1

OPERATION

When the HEGS5000 Controller is in Standalone Mode, a user can control and program
KD6/HD6 PTZ cameras. The KD6/HD6 PTZ cameras must be defined in the HEGS5000
as defined in Section 2.3.1 and 4.3.
There are two overlays, English text version and Icon version, for the standalone mode.
System Controller HEGS5000
Iris Iris Auto
Open Close Iris
System Controller HEGS5000
All instructions are given using the text overlay with the Icon overlay in parenthesis.
Note: The Monitor Key (
Esc (
Rev. 1.01
SECTION 5:
STANDALONE MODE
HEGS5000
Camera
Character
Select
Monitor
Menu
ESC
Enter
Focus Freeze
Near Video

Figure 5. HEGS5000 English Text Overlay

ABC
1. ____
2. ____
3. ____
A

Figure 6. HEGS5000 Icon Overlay

1. ____
2. ____ )key. All cameras must have dedicated monitors.
3. ____
Run
Menu
Dome
Menu
System
Menu
Run
1. ___
3. ___
1. ___
3. ___
Sys
1. ___
3. ___
) is not used in the standalone mode except as a Menu
19
PreShot
VectorScan
900.0800
19-Jun-06