Program Preshot - Honeywell HEGS5000 User Manual

5.2.2 Program PreShot

There are two methods for programming and saving PreShots. The first method quickly
saves the current camera scene and assigns a predefined title. For example, PreShot 1
is titled PS1, PreShot 2 is titled PS2, etc. The second method allows the user to
program a 24-character title.
Note: Operators may program PreShots 0-10. To program PreShots 11-98, you must
log in as a Master user.
Program PreShot Method 1 (Default title)
1. Position the camera (pan, tilt) and the lens (zoom, focus, iris) to the desired scene.
2. Press the Run Menu (
press Enter (
3. Enter the desired PreShot # (0-99) and Press Enter (
and lens setting are saved for the PreShot # entered.
Example: To save PreShot 5 with default title PS5.
1. Position the camera and lens.
2. Press the Run Menu (
3. Press the Enter (
4. Press the 5 key.
4. Press the Enter (
The current KD6/HD6 scene is saved as PreShot 5 with title PS5.
Program PreShot Method 2 (User-defined Title)
1. Press the Dome Menu (
2. Press the + or – key until PreShot Menu is displayed.
3. Press the Enter (
5. Press the + or – key until Program is displayed.
Rev. 1.01
Run
1. ___
) key until Quick Prg Preset is displayed on the LCD then
3. ___
).
Run
1. ___
) key until Quick Prg Preset is displayed.
3. ___
) key.
) key.
1. ___
) key.
3. ___
) key.
25
). The current PTZ position
900.0800
19-Jun-06