Spot Monitor Operation - Honeywell HEGS5000 User Manual

6.1 INTRODUCTION, CONTINUED
The initial display after a user logs on the controller is shown below.
<Spot01
The operator has control of camera 1 and Spot Monitor 1 (multiplexer 1).
Tip: Press
Tip: Press Monitor (
monitor.
6.2

SPOT MONITOR OPERATION

The Spot monitor operates in two modes: Absolute and Relative. The HEGS5001 is in
absolute mode as shown below by default.
<Spot01
To toggle between Absolute and Relative modes, press the CAMERA key twice quickly.
Camera (
The SPOT still shows the multiplexer number while the CAM shows the input of that
multiplexer with an asterisk in front of the number.
<Spot01
Rev. 1.01
Cam001>
+ –
and to select the next or previous camera.
) followed by
Cam001>
) Camera ( )
Cam*01>
44
+ -
or to select the next or previous spot
900.0800
19-Jun-06