Camera (Kd6/Hd6) Selection; Manual Control; Table 1. Manual Control - Honeywell HEGS5000 User Manual

5.1.1 Camera (KD6/HD6) Selection

To select a camera for control:
1. Enter the camera number (1-256) using the numeric keypad.
2. Press the Camera (

5.1.2 Manual Control

Function
Pan/Tilt
Zoom
Iris
Focus
Run
1. ___
Run Menu ( )
3. ___
Rev. 1.01
) key.

Table 1. Manual Control

Use the joystick to control (pan and tilt) the camera. Move the joystick
up and down for tilt functions and left and right for pan functions.
Rotate the joystick knob clockwise/counterclockwise for zoom in/out
functions.
A
Press the Auto Iris (
Press the Iris Open (
Press the Iris Close (
Press the Focus Near (
focus the lens.
Run
1. ___
The Run Menu ( ) key (below the LCD display) is used to control
3. ___
certain features of the KD6/HD6 PTZ camera. Press Run Menu (
continuously to scroll between available options. When the desired
option is displayed on the controller's LCD, press Enter (
Nightshot – press Enter (
(Nightshot On or Nightshot Off) is displayed on the monitor where
the PTZ video is viewed.
Backlight On/Off – press Enter (
(Backlight Compensation On or Backlight Compensation Off) is
displayed on the monitor where the PTZ video is viewed.
Run Tour – press Enter (
The tour must be programmed for it to run. Refer to section 5.2.9 for
programming tours.
Find Home – Press Enter (
position.
Quick Prg Preset – Position PTZ of KD6/HD6 > Press Enter (
then Preshot # (000-099)>Press Enter (
stored with the selected Preshot #.
Log Out – Press Enter (
cancel log out
20
Description
) key to place the lens in auto iris mode
) key to manually open the lens iris.
)key to manually close the lens iris.
) or Focus Far (
) to toggle on/off. A message
) to toggle on/off. A message
) > then tour # (1-3) > then Enter (
) to send selected KD6/HD6 to home
) to log out; press Menu Esc (
) keys to manually
Run
1. ___
)
3. ___
) to select.
).
)>
). The current scene is
1. ____
2. ____ ) to
3. ____
900.0800
19-Jun-06