Table of Contents
Advertisement
4.3 MENUS, CONTINUED
Menu Name
Cameras
Camera Num
(Cam Num) Type
Tip:
To make it easy to setup camera TYPES and camera ADDRESSES, start with Camera 1
TYPE and simply press Enter (
and then press Enter (
ADDRESS for each subsequent camera until all cameras are done.
(Cam Num) Address
Rev. 1.01
Cameras
Menu
Number
3.0
Used to set the type of camera and the address to
which the controller sends commands when this camera
is selected on the monitor or spot monitor if the
controller is in Mux Mode . Press Enter (
this menu.
3.1
Camera Number – use the number keys or the
keys to select the camera number.
Once the camera number is selected, press Enter (
to move to the next submenu.
3.1.1
Used to select the type of camera for each camera
number. The camera number in parentheses indicates
which camera is currently selected.
To set camera type, use the
between the four camera types (KD6/HD6, KD6-Z, Fixed
Camera, and Pan Tilt Head).
Press Enter (
next submenu.
) after setting the type to go to the address. Set the address
) to move to the TYPE for camera 2. Continue setting the TYPE and
3.1.2
Used to set the camera address. The camera number in
parentheses indicates which camera is selected.
Enter the required address of the camera using the
number keys or the
the address must be the same as the value set in menu
5.0 setup.
Press Enter (
Press Clear/Manual (
15
Description
+
–
and
keys to select
) or joystick tilt down to move to the
+
–
and
keys. For KD6-Z domes,
) to move to the next camera.
) to exit this menu.
) to access
+
–
and
)
900.0800
19-Jun-06
Hide quick links:
Advertisement
Table of Contents
