Alarms - Honeywell HMAX082 Owner's Operation Manual

8.3.5 Alarms

The MaxCom Gold supports sixteen alarms. The configuration of the alarm (normally
open or normally closed) and the system's action in response to the alarm is
programmable through the software configuration utility.
1. There are two ways to access the Alarms programming window:
a. Click on the down arrow beside the MaxCom Icon on the Icon toolbar, then click
b. Click on Configure in the main menu, then MaxCom, then Alarms as shown in
Rev. 1
on Alarms as shown in the display below.
the following display.
64 900.0560
18-July-2005