Honeywell HMAX082 Owner's Operation Manual page 101

8.4.5 Tours, Continued
b. Click on Configure in the main menu, then Camera, then Tours as shown in the
2. Click on the + beside the camera you want to program. Note: In the following
menu displays, there are sixteen cameras shown. If your MaxCom Gold
configuration is for 8 cameras, only Camera 1 through Camera 8 will be displayed.
In the following step, the + sign beside Camera 1 was clicked on.
Rev. 1
following display.
The Tours window is displayed.
89 900.0560
18-July-2005