Table of Contents
Advertisement
3.5 FOCUS
Press the auto button above the focus control buttons to toggle the camera in and out of
auto-focus mode. If the LED above the auto focus button is illuminated, the auto-focus
mode is selected.
To manually focus the camera, press the NEAR (+) or FAR (-) buttons. The camera
automatically switches to manual focus mode if one of these two buttons is pressed.
3.6 IRIS
Press the auto button above the iris control buttons to toggle the camera in and out of
auto-iris mode. If the LED above the auto iris is illuminated, the auto-iris mode is
selected.
To manually control the camera iris, press the OPEN (+) or CLOSE (-) buttons. The
camera automatically switches to manual iris mode if one of these two buttons is
pressed.
3.7 MANUAL CHANGE OVER (COLOUR TO MONO)
This feature is only available in Change Over RapidDomes. The operator can force the
camera to change from colour to monochrome (black and white) or from monochrome
to colour. The camera will automatically change back depending on the illumination of
the scene.
The aux button toggles between monochrome and colour. If the camera is in the mode
selected by the operator, and this mode is different than the mode the camera would
have automatically selected, the aux button is illuminated.
Likewise, if the camera is in automatic mode, the aux button is not illuminated.
3.8 WASH, WIPE, AND AUXILIARY FUNCTIONS
If the receiver being controlled has wash and wipe functions, they are controlled as
follows:
WIPE – press the wipe button to activate the wiper. Press the wipe button again to
deactivate the wiper. Note: If the wipe button is illuminated, the wiper is ON.
WASH – press and hold the wash button to activate the washer. Release the wash
button to deactivate the washer. Note: If the wash button is illuminated, the washer is
ON.
AUX - If the receiver being controlled has a separate momentary auxiliary function, it is
controlled as followed:
Rev. 1
11
900.0560
18-July-2005
Hide quick links:
Advertisement
Table of Contents
