Privacy Zones - Honeywell HMAX082 Owner's Operation Manual

8.4.2 Preset Titles, Continued
There are several buttons on the bottom of the window to assist the user.
Send – After editing the fields, click on the Send button to transmit the configuration
to the MaxCom Gold.
Receive – To transmit the current configuration of Preset Titles stored in a MaxCom
Gold to the PC configuration utility, click on the receive button.
Reload – To return the screen to the default configuration or to the configuration
prior to any changes made in this editing session, press the Reload button.
Save – After editing, click on Save to save your changes.
3. Edit the titles of the presets. Each preset may be given an alphanumeric title of up
to 20 characters.
4. Click on Save to save any changes you have made. Note: If you click on another
camera prior to saving changes, the system will prompt you to save your changes.
Yes – saves the changes you made in the current window and opens the window for
the selected camera.
No – discards any changes you made in the current window and opens the window
for the selected camera.
Cancel – aborts the action of selecting a different camera and returns the user to the
Preset Titles window for the previously selected camera.
5. Click on Send to transmit the preset titles for the selected camera to the MaxCom
Gold. Note: this step can be done when all programming is completed using the
Send Receive Centre utility.
6. When finished programming preset titles, click on the X in the upper right corner to
close the menu.

8.4.3 Privacy Zones

Presets 100 – 127 in each camera can be defined for privacy zones. If a preset is
defined as a privacy zone, the programmed preset becomes a privacy zone and the
video is blanked whenever the camera is positioned in an area inside the defined preset
settings.
1. Access the Privacy Zones menu. The menu can be accessed two ways:
Rev. 1 82 900.0560
18-July-2005