Monitors; Auto-Sequence - Honeywell HMAX082 Owner's Operation Manual

7.1.7 Remote Reset, Continued
b. Select the "camera to reset" by pressing the number buttons for the
c. Press aux to reset the selected camera.
d. Select another camera or press lock to exit.

7.2 MONITORS

To access the monitors menu:
1. Access the main menu by pressing the 9 button,
the 0 button, the 9 button, the 0 button, and then
pressing the lock button.
2. Access the monitors menu, by pressing the 2
button.

7.2.1 Auto-Sequence

From the monitor menu, press the 1 button to
program monitor auto-sequences.
1. Use the joystick (up, down, left, and right) to
select the desired fields and enter data
using the number buttons on the keyboard.
The camera number range is from 1 to the
maximum number of cameras in the system.
The dwell range is from 1 to 255 and defines
the length of time (in seconds) that the
camera will be displayed for during the
sequence.
Rev. 1
corresponding camera, and then press the camera button. Note: if you select a
camera that is absent, the display returns to camera 1.
STEP CAMERA
01
02
03
04
05
06
31
MAIN MENU
1 CAMERAS
2 MONITORS
3 SYSTEM
4 ALARMS
5 SOFTWARE
MONITOR MENU
1 AUTO-SEQUENCE
2 PARTITIONING
3 TEXT BRIGHTNESS
SELECT OPTION
LOCK TO EXIT
AUTO-SEQUENCE SETTINGS
DWELL
01:FRONT DOOR 5
02:BACK DOOR 5
03:SIDE DOOR 5
04:CAR PARK 5
05:SHOP FLOOR 5
06:OFFICE 5
AUX TO SET END OF SEQUENCE
LOCK TO EXIT
Note: camera titles shown above are
for illustrative purposes only.
18-July-2005
900.0560