Section 7: Menu Options; Description - Honeywell HMAX082 Owner's Operation Manual

7.0 DESCRIPTION

The on-screen menus can be accessed by operators to define the parameters of the
cameras, monitors, alarms and the system.
Note:
To access the on-screen menus, perform the following procedures.
1. Press the 9 button,
2. Press the 0 button
3. Press the 9 button
4. Press the 0 button
5. Press the lock button.
OR - Press the F1 button.
If there is no keyboard activity for 60 seconds while the MaxCom is in any of the menus,
the MaxCom automatically returns to normal operation.
Systems with more than one monitor - Only one monitor can display the menus at any
one time. If the menu code is entered after another operator has already accessed the
menus, the "MENU IN USE" message is displayed. The message is removed as soon as
the other operator exits the menu (or if the operator attempting to access the menus
switches to a different camera).
The following setup tree defines the options under each menu in the main setup menu.
Rev. 1
SECTION 7:
MENU OPTIONS
The security level of the pass code used to log on to the system determines
the level of access to the menus. Refer to Tables 1 and 2 in section 1.4 for
pass codes and security levels.
17 900.0560
18-July-2005