Honeywell HMAX082 Owner's Operation Manual page 90

8.4.1 Camera Setup, Continued
Rev. 1
b. Click on Configure (main menu), then Camera, and then Camera Setup.
The camera setup menu is displayed.
There are several buttons on the bottom of the window to assist the user.
Send – After editing the fields, click on the Send button to transmit the
configuration to the MaxCom Gold.
Receive – To transmit the current configuration of the camera setup stored in a
MaxCom Gold to the PC configuration utility, click on the receive button.
Reload – To return the screen to the default configuration or to the configuration
prior to any changes made in this editing session, press the Reload button.
Save – After editing, click on Save to save your changes.
78 900.0560
18-July-2005