Preset Titles - Honeywell HMAX082 Owner's Operation Manual

8.4.1 Camera Setup, Continued
3. Click on Save to save any changes you have made.
4. Click on Send to transmit the configuration for camera setup to the MaxCom Gold.
Note: this step can be done when all programming is completed using the Send
Receive Centre utility.
5. When finished programming the camera setup, click on the X in the upper right
corner to close the menu.

8.4.2 Preset Titles

1. Access the Preset Titles menu. The menu can be accessed two ways:
Rev. 1
a. Click on the down arrow beside the dome icon and then select Preset Titles.
b. Click on Configure (main menu), then Camera, and then Preset Titles.
80 900.0560
18-July-2005