Figure 3-17 Storage Status Screen - Honeywell HRXD9 User Manual

Configuration
Caution
Highlight the Status tab, and the Storage Status screen displays.
The Type column displays the type of storage device.
The Disk Bad column displays the percentage of bad sectors. Not formatted indicates
the device is not formatted.
The Temperature column displays the temperature of the storage device.
The S.M.A.R.T. column displays Good, Bad or N/A, depending on storage conditions.
•
•
•
Rev 1.00
Note When disconnecting a USB hard disk drive from the DVR,
highlight Don't Use first and then disconnect the device.
Do NOT disconnect the USB cable or the power from the device
while copying video clips. If the USB cable is disconnected while
copying video clips, archived data might be lost.
Figure 3-17
Good - The storage condition is normal.
Bad - Data cannot be written on or read from the storage device.
N/A - Storage conditions are normal, however, the S.M.A.R.T. monitoring is not
working or supported.
When the storage condition is Bad, the Event Status - Storage
Note
screen displays and you can check the storage condition for
details. Once the Bad message displays, replacing the hard disk
drive is recommended, usually within 24 hours.
Storage Status Screen
31 Document 900.0856
12/06