Table of Contents
Advertisement
Operation
The DVR automatically assigns a file name to the video clip. However, you can give the
video clip file a different name. Highlight the box beside File Name and press
virtual keyboard appears. Enter a file name for the video you are backing up and select
Close. The DVR will automatically add the camera number (for example, 01) and .exe
to the file name. If you want to save the file in a specific folder, enter the folder name
followed by a "/". For example: "folder/filename".
Once you have given the video clip a file name, highlight Start and press
confirmation screen displaying data size will appear. When the storage device does not
have enough space, the DVR will ask if you want to copy as much of the video clip as
possible in the available space. Highlight Continue and press
Once the clip copy starts, you can cancel it by selecting Cancel or hide the screen by
selecting Close. When selecting Close, Clip Copy continues and a confirmation screen
will display when complete.
Rev 1.00
Note
While copying video clips on the CD-RW or DVD RW, the DVR
will stop archiving video data until clip copy is finished.
When the error message Firmware update of the
Note
optical drive is required displays, update the firmware
of the installed CD-RW drive or DVD RW drive. Please follow the
instructions described in
Note
When naming a file, you cannot use the following characters: \, /,
:, *, ?, ", <, >, |.
Note
Only 4.7GB DVD media is available. To clip copy video on the
DVD media using remaining space, the size of previously
recorded data on the DVD media should be less than 4GB.
Note
The file size for clip copy is limited to 2GB.
System
103
Information,
page
23.
to continue clip copy.
Document 900.0856
. A
. The
12/06
Advertisement
Table of Contents
