Motion Detection Screen; Figure 3-58 Alarm-In Actions 2 Screen; Figure 3-59 Motion Detection Settings Screen - Honeywell HRXD9 User Manual

Configuration
Highlight the desired box under the PTZ heading, and press
appear. Select the preset position for each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects an input on the associated alarm input.
Highlight the desired box under the Spot Monitor heading, and press
SPOT monitors and cameras appears. Each SPOT monitor can be associated with a
camera. The DVR will display the associated camera on the SPOT monitor whenever it
detects an input on the associated alarm input.
You can save your Alarm-In changes by highlighting Save and pressing
Cancel exits the screen without saving the changes.

Motion Detection Screen

Highlight Motion Detection in the Event menu and press
setup screen appears.
Your DVR has built-in video motion detection. Video motion detection can be turned On
or Off for each camera.
Rev 1.00
Figure 3-58 Alarm-In Actions 2 Screen
Figure 3-59 Motion Detection Settings Screen
63
. A list of PTZ presets
. A list of
. Selecting
. The Motion Detection
Document 900.0856
12/06