Table of Contents
Advertisement
Configuration
Highlight the box beside Type and press
configuration from: Manual, DHCP and ADSL (with PPPoE). Select the desired type
and press
Selecting Manual as the Type allows you to set up LAN parameters manually.
Change the numbers by highlighting them and using the Up and Down arrow buttons
to increase or decrease the number.
The factory default LAN settings are:
Highlight the box beside DNS Server. Press the Up and Down arrow buttons to set the
IP address of the DNS server. If you set up the DNS server, the domain name of the
DVRNS server instead of the IP address can be used during the DVRNS server setup
(refer to
Highlight the Port Number Setup... box and press
appears.
Rev 1.00
Figure 3-25
.
Note
You will need to get the appropriate IP Address, Gateway and
Subnet Mask values from your network administrator.
IP Address:
Gateway:
Subnet Mask:
DVRNS Setup
on
Note
You will need to get the appropriate Port Numbers for each RAS
and WebGuard related program (Admin, Callback, Watch and
Search) from your network administrator.
LAN (Manual) Setup Screen
. You can select the type of network
192.168.1.129
192.168.1.254
255.255.255.0
page 41
for details).
37
. The Port Number Setup screen
Document 900.0856
12/06
Advertisement
Table of Contents
