Figure 3-32 Notification Mail Setup Screen; Figure 3-33 Authentication Setup Screen - Honeywell HRXD9 User Manual

Configuration
Highlight Enable and press
change the settings if Mail is enabled.
Highlight the box beside SMTP Server and press
the SMTP Server IP address obtained from your system administrator.
Highlight the box beside Port and press
Server port number obtained from your system administrator. The default port number
is 25.
Highlight Use SSL/TLS and press
the DVR can send an e-mail via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
Highlight the box beside Authentication and press
appears. Highlight Use and press
beside User/Password and press
enter the user ID and password.
Highlight the box beside Sender and enter the sender's e-mail address. Use the virtual
keyboard to enter the e-mail address.
Rev 1.00
Figure 3-32 Notification Mail Setup Screen
to toggle between On and Off. You will only be able to
Figure 3-33 Authentication Setup Screen
Note The e-mail address must include the @ character to be a valid
address.
. Use the arrow buttons to enter the SMTP
to toggle between On and Off. When it is On,
to toggle between On and Off. Highlight the box
. A virtual keyboard appears allowing you to
44
. Use the arrow buttons to enter
. An Authentication screen
Document 900.0856
12/06