Cisco 4300 User Manual page 61

Chapter 3 Configuring and Managing the IP Camera
Table 3-25
each message includes the date and time that it was logged. In this table:
•
•
•
Table 3-25 Log Messages
Message Name
AUTHENTICATION_FAILED
AUTHENTICATION_FAILED
AUTHORIZATION_FAILED
CODEC_LOST
CONFIG_SAVE_FAILED
CONFIG_SAVED
CONFIG_UPLOAD_FAILED
CONFIG_UPLOADED
DEFAULTS_FAILED
OL-19609-04
describes the messages that can appear in the IP camera log file. When you view the log file,
Messages appear in alphabetical order
Angle brackets (<>) indicate items that are replaced by appropriate information when the message
appears. Italic text describes these items.
Severity indicates the severity of the message:
– 0—Emergency (the system is unusable)
1—Alert (a situation occurred that requires immediate action)
–
2—Critical (a situation occurred that requires action soon)
–
3—Error (an error occurred, but it does not necessarily affect the ability of the system to
–
function)
4—Warning (an undesirable condition occurred)
–
5—Notice (notification about a system condition that is not an error condition)
–
6—Informational (information about a system activity)
–
7—Debug (information about a system activity with detailed technical information)
–
Description that Appears in Log File
Access authentication to <web server,
streaming server, or SSH server> by
user <user> <IP address or
hostname> failed.
Access authentication to <server type>
server <server IP address or
hostname> failed.
Unauthorized address <IP address or
hostname> attempted to access camera.
Connection to Codec/Sensor module
was lost. Internal module is either down
or not responding.
Saving configuration to user <user>
<IP address or hostname> failed.
Configuration saved by user <user>
<IP address or hostname>.
Uploading configuration failed from
user <user> <IP address or hostname>.
Configuration uploaded from user
<user> <IP address or hostname>.
Restoring factory defaults failed for
user <user> <IP address or hostname>.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
Explanation
An attempt to log in or authenticate to
the IP camera failed.
The IP camera was unable to access an
SNTP, Syslog, DNS, SMTP, HTTP, or
802.1x server.
An attempt was made to access the IP
camera by using invalid user
credentials for from an IP address that
has been configured for no access.
The IP camera codec/sensor module is
not responding.
A user attempt to save the IP camera
configuration failed.
The IP camera configuration was saved
by a user.
A user attempt to import the IP camera
configuration failed.
The IP camera configuration was
imported by a user.
An attempt to reset the IP camera to its
factory default configuration failed.
Log Windows
Severity
3
4
3
4
3
5
3
5
3
3-37