Video Overlay Settings Window - Cisco 4300 User Manual

Feature Setup Windows
Table 3-3
Option
End Time

Video Overlay Settings Window

The Video Overlay Settings window provides options for configuring overlay information that appears
on the video image in the Camera Video/Control window.
To display the Video Overlay Settings window, access the configuration windows as described in the
"Performing the Initial Setup of the IP Camera" section on page
Video Overlay.
If you change any options in this window, you must click the Save Settings button to save the change.
If you do not click this button, changes are not retained when you exit the window. Save Settings appears
at the bottom of the window. You may need to scroll down to it.
Table 3-4
Table 3-4
Option
Text Overlay Area
Enable Time Stamp
Enable Text Display
Display Text
IO Ports Settings Window
The IO Ports Settings window lets you configure various options for the two input and two output ports
on the IP camera. A state change of an input ports triggers a camera to take configured actions. Output
ports send signals that can control external devices, such as alarms or door switches.
The IP camera can trigger an action only when the input that is received on an input port comes from a
contact that is in a normally closed condition. The camera triggers the action when the contact changes
to an open condition.
To display the IO Ports Settings window, access the configuration windows as described in the
"Performing the Initial Setup of the IP Camera" section on page
IO Ports.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-8
Camera Settings Window Options (continued)
Description
Enter the time, in 24 hour format, that the camera disables its night filter.
describes the option in the Video Overlay Settings window.
Video Overlay Settings Window Options
Description
Check this check box to display the time from the internal clock of the IP
camera as an overlay on the video image from the IP camera.
Check this check box to display the text that you enter in the Display Text
field as an overlay on the video image from the IP camera.
This option can be useful for identifying this IP camera in an installation
with several IP cameras.
If you check the Enable Text Display check box, the text that you enter in
this field appears as an overlay on the video image from the IP camera.
The text can contain up to 26 characters, which can include letters, numbers,
spaces, and these characters: ! $ % ( ) + , - . / : = @ ^ _ ` { } ~
Chapter 3 Configuring and Managing the IP Camera
2-5, click Feature Setup, then click
2-5, click Feature Setup, then click
OL-19609-04