802.1X Settings Window - Cisco 4300 User Manual

Chapter 3 Configuring and Managing the IP Camera

802.1x Settings Window

The 802.1x Settings window provides options for configuring 802.1x authentication for the IP camera.
These settings require that RADIUS be configured on your network to provide the client authentication.
To display the 802.1x Settings window, access the configuration windows as described in the
"Performing the Initial Setup of the IP Camera" section on page
802.1x (RADIUS).
If you change any options in this window, you must click the Save Settings button to save the changes.
If you do not click this button, changes are not retained when you exit the window. Save Settings
appears at the bottom of the window. You may need to scroll down to it.
Table 3-14
Table 3-14
Option
802.1x Settings Area
Enable 802.1x
Protocol Type
EAP-TLS Configuration Options
Note
User Name
Device (Client)
Certificate
Password (for Private
Key)
Root CA Certificate
EAP-TTLS Configuration Options
Note
Inner Authentication
User Name
Password
Anonymous ID
Validate Server
Certificate
OL-19609-04
describes the options in the 802.1x Settings window.
802.1x Settings Window Options
Description
Check this check box to enable 802.1x authentication for the IP camera.
Choose the protocol for 802.1x authentication. Options are EAP-TLS,
EAP-TTLS, EAP-PEAP, and EAP-FAST.
The remaining fields in this window change depending on the protocol type
that you choose.
These options appear if you select the protocol type EAP-TLS.
Enter the user name that the IP camera uses to access the RADIUS server.
Path and folder where the device certificate for the IP camera is stored. You
can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to the
IP camera.
If the private key in the device certificate is password protected, enter the
password that is required to unlock the private key.
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to the
IP camera.
These options appear if you select the protocol type EAP-TTLS.
Choose an inner authentication method for EAP-TTLS. Options are
MS-CHAP, MS-CHAP v2, PEAP, and EAP-MDS.
Enter the user name that the IP camera uses to access the RADIUS server.
Enter the password that the IP camera uses to access the RADIUS server.
Optional. Unsigned public identifier to be used instead of a user name for
logging in to the RADIUS server.
Check this check box if you want the identity of the RADIUS server to be
validated.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
Network Setup Windows
2-5, click Network Setup, then click
3-23