Time Settings Window - Cisco 4300 User Manual

Network Setup Windows
Table 3-10
Option
IP Addressing Area
Configuration Type
IP Address
Subnet Mask
Gateway Address
Primary DNS
Secondary DNS

Time Settings Window

The Time Settings window provides options for setting and maintaining the time of the IP camera.
To display the Time Settings window, access the configuration windows as described in the
the Initial Setup of the IP Camera" section on page
If you change any options in this window, you must click the Save Settings button to save the changes.
If you do not click this button, changes are not retained when you exit the window. Save Settings
appears at the bottom of the window. You may need to scroll down to it.
Table 3-11
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-18
IP Addressing Window Options
Description
Choose the method by which the IP camera obtains its IP address:
Dynamic—If your network includes a DHCP server for dynamic
•
allocation of IP addresses, choose this option if you want DHCP to
assign an IP address and subnet mask to the IP camera. Depending on
your router, the default gateway, primary DNS server, and secondary
DNS server may also be assigned. The DHCP server must be configured
to allocate static IP addresses based on MAC addresses so that the IP
camera always receives the same address.
Static—Choose this option if you want to manually enter an IP address,
•
subnet mask, default gateway, and DNS server IP addresses for the
camera.
If you configured the IP camera for a static IP address, enter that IP address.
If you configured the IP camera for a static IP address, enter the subnet mask
for the IP camera. Use the same value that is configured for the PCs on your
network.
If you configured the IP camera for a static IP address, enter the gateway for
the IP camera. Use the same value that is configured for the PCs on your
network.
Optional. Enter the IP address of the primary the DNS server that is used in
your network. Use the same value that is used for the PCs on your LAN.
Typically, your ISP provides this address.
This address is required if you use a host name instead of an IP address in
any configuration field in the IP camera configuration windows.
Optional. Enter the IP address of a secondary (backup) DNS server to use if
the primary DNS server is unavailable. Enter the DNS server to be used if
the primary DNS server is unavailable.
This address is required if you have a secondary DNS server an you use a
host name instead of an IP address in any configuration field in the IP camera
configuration windows.
describes the options in the Time Settings window.
Chapter 3 Configuring and Managing the IP Camera
2-5, click Network Setup, then click Time.
"Performing
OL-19609-04