Pan Tilt Settings Window - Cisco 4300 User Manual

Feature Setup Windows
Table 3-6
Option
Pan/Tilt Area
Pan and Tilt Enabled
Protocol
Address
RS-232 Settings
Baud Rate
Data Bits
Parity
Stop Bits
Event Notification Window
The Event Notification window provides options for how the IP camera handles events. An event is any
of the following:
•
•
•
When an event occurs, it triggers the IP camera to take certain configured actions:
•
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-10
Pan Tilt Settings Window Options
Description
Check this check box to enable pan and tilt operation for the IP camera.
Display only. Indicates the protocol for the pan/tilt functionality.
Enter the logical address of the external PTZ device.
To determine this address, refer to the documentation for that device.
Choose the Baud rate value that is configured on the device that controls the
pan and tilt functions of the IP camera.
The default setting is 4800 bps.
Display only. Indicates the data bits configuration for the serial port on the
IP camera.
Display only. Indicates the parity configuration for the serial port on the IP
camera.
Display only. Indicates the stop bits configuration for the serial port on the
IP camera.
A change of state from low to high or from high to low on an input port of the IP camera. For related
information about input ports, see the
Motion that the IP camera detects. For related information about motion detection, see the
detection controls" rows in
Loss of video signal.
HTTP notification—IP camera sends notification to a remote system via HTTP. This information
includes the following:
– Device ID—ID of the IP camera
– Device name—Name of the IP camera
– IP address—IP address of the IP camera
– MAC address—MAC address of the IP camera
Channel ID—Channel identification number (1 for primary stream or 2 for secondary stream)
–
Channel name—Name that is configured for the channel
–
Date and time—Date and time that the event occurred
–
Active post Count—Sequence number of the notification for this event
–
Event type—Type of event
–
"IO Ports Settings Window" section on page
Table 4-1.
Chapter 3 Configuring and Managing the IP Camera
3-8.
"Motion
OL-19609-04