Resetting The Ip Camera - Cisco 4300 User Manual

Chapter 2 Getting Started
Table 2-4
Reset Type
Reboot.
Factory reset.
OL-19609-04

Resetting the IP Camera

Procedure
Press and immediately release
the Reset button.
Press and hold the button for at
least 15 seconds.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
Resetting the IP Camera
Remarks
This action is equivalent to
powering the IP camera down
and then powering it up. Settings
that are configured for the IP
camera are retained.
Sets all IP camera options to
their default values. After you
perform this procedure, follow
the steps in the "Performing the
Initial Setup of the IP Camera"
section on page 2-5.
2-11