Cisco 4300 User Manual page 37

Chapter 3 Configuring and Managing the IP Camera
Table 3-7
Option
User Name
Password
HTTP Authentication
Secondary HTTP Server Identify an optional secondary server to which HTTP messages are sent by
URL Base
Port Number
User Name
Password
HTTP Authentication
Email Notification Area
Primary SMTP Server
Primary SMTP Port
POP Server
Authentication
Account Name
Password
OL-19609-04
Event Notification Window Options (continued)
Description
If authentication is required on the primary server to which HTTP messages
are sent, enter the user name.
If authentication is required on the primary server to which HTTP messages
are sent, enter the password.
If authentication is required on the primary server to which HTTP messages
are sent, choose the authentication method.
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
Enter a string to be used as the prefix in the HTTP URL for the secondary
server. The HTTP URL is sent in this format:
http://<IP address>/<URL Base>?<system-provided-name-value-pairs>
where IP address is the IP address of the destination server, URL Base is the
string that you enter, and system-provided-name-value-pairs is information
about the event.
Enter the port number that receives messages on the secondary server to
which HTTP messages are sent.
If authentication is required on the secondary server to which HTTP
messages are sent, enter the user name.
If authentication is required on the secondary server to which HTTP
messages are sent, enter the password.
If authentication is required on the secondary server to which HTTP
messages are sent, choose the authentication method.
Identify the primary SMTP server that is used for sending e-mail by
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
Enter the port number for the primary SMTP server.
Identify the primary POP server that is used for sending e-mail by choosing
IP Address or Hostname from the drop-down list and entering the IP
address or host name in the corresponding field.
This field is dimmed if you do not choose Requires POP Before SMTP in
the Authentication field that follows.
If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
If the primary SMTP server requires authentication, enter the account name
for the server.
If the primary SMTP server requires authentication, enter the account
password for the server.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
Feature Setup Windows
3-13