Feature Setup Windows - Cisco 4300 User Manual

Chapter 3 Configuring and Managing the IP Camera
•
•
•
•
Streaming Settings Window
The Streaming Settings window provides options for configuring audio and video streams from the IP
camera. You can configure settings for the primary and an optional secondary video stream.
Configuring a secondary stream is useful for providing a video stream that is at a lower resolution than
the primary stream to third-party devices or software.
The primary stream supports H.264 for video and G.711 A-law, G.711 u-law, and AAC for audio. The
secondary stream supports MJPEG for video and does not support audio.
When configuring video streams, be aware of the following guidelines:
•
•
•
•
•
Table 3-1
Resolution
1080p
720p or lower
To display the Streaming Settings window, access the configuration windows as described in the
"Performing the Initial Setup of the IP Camera" section on page
Streaming.
OL-19609-04
Pan Tilt Settings Window, page 3-9
Event Notification Window, page 3-10
Patrol Sequence Window, page 3-14
Analytics Windows, page 3-16
You cannot configure a secondary stream (channel 2) if you configure the resolution for the primary
stream (channel 1) to 1920 x 1080
You cannot configure the resolution for the primary stream to 1920 x 1080 if a secondary stream is
enabled
The resolution of the primary stream must be higher than the resolution of the secondary stream
You cannot configure a maximum frame rate of 60 for the primary stream if the secondary stream is
enabled.
Multiple secondary frame rates are now supported for MJPEG.
combinations of primary (H.264) and secondary (MJPEG) streams. If a secondary frame rate that is
not shown in this table is selected in Cisco Video Surveillance Manager, the IP camera uses the
closest available frame rate.
Stream Support for Cisco Video Surveillance 4000 Series IP Camera Video
Primary (fps)
Any
60
30
25
20
15
10
8
6
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
Secondary (fps)
Not supported
Not supported
30 15 10
25 13 5
20 10 5
15 8 5
10 5 1
8 — —
6 — —

Feature Setup Windows

Table 3-1 shows the frame rate
5 3
1 —
1 —
3 1
— —
— —
— —
2-5, click Feature Setup, then click
1
—
—
—
—
—
—
3-3