Initiating Pairing From Your Bluetooth-Enabled Mobile Phone - Cisco SPA300 Series User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
STEP 7
NOTE
STEP 8
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Press to scan for your mobile phone.
Scan
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset may not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth enabled, and
retry the scan.
In the Select a Bluetooth Device to Pair list, select the mobile phone to which you
want to pair and press Connect.

Initiating Pairing from Your Bluetooth-Enabled Mobile Phone

The procedure varies depending on your phone model. You must turn Bluetooth on,
and you may need to configure a separate setting to make your mobile phone
discoverable by other devices. The following example uses an Apple iPhone.
Before starting, it's helpful to find the MAC address of your Cisco SPA 525G2 IP
phone. From your IP phone, go to the Setup menu and select Status. Select
Product Information. The MAC address is displayed.
On your iPhone, click Settings.
Under General, choose Bluetooth. Ensure Bluetooth is turned on.
In the Bluetooth Window, under Devices, find the MAC address of your Cisco SPA
525G2 IP phone.
Select the MAC address of the Cisco SPA 525G2.
3
78