Using The Intercom And Paging Features - Cisco SPA300 Series User Manual

Using Basic Phone Functions

Using the Intercom and Paging Features

Using the Intercom and Paging Features

NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Depending on your phone model and the feature buttons that are configured for
you, you may be able to place an intercom call, page a group of phones, or make
an announcement through an external speaker.
If Do Not Disturb is enabled on a target phone, the page is not transmitted to that
phone.
Task
Placing an intercom call
from a feature button
If configured
Sending a page through
an external speaker
If available
Instructions
This feature requires a feature button that is
configured for an intercom call to a personal
extension. The button will display the target user's
name and extension number.
To initiate the call through your phone speaker,
simply press the feature button that is configured
for the intercom. A beep sounds through the
speaker of the target phone. You have two-way
audio for the conversation.
Alternatively, you can lift the handset or press
instead of using the speaker.
This feature requires an external speaker that is
connected to the Line Out port of the Unified
Communications System.
1. Lift the handset or press
2. Enter the extension number for External Paging,
or use the Corporate Directory > Groups
Directory to find and dial the number. For more
information, see Using the Phone Directories,
page 48.
You have one-way audio to make the
announcement through the external speaker.
2
or .
35